Edge series of digital audio processors

Up to 16 digital audio processors, capable of AEC, ANC, AFC, and AMX functions.

8 * 8 Digital Audio Matrix Network Edition Edge 8x8

PRODUCT

An automatic mixing matrix with 8 inputs and 8 outputs, equipped with 8 analog inputs and 8 analog outputs, 4 dante inputs and 4 dante outputs. The microphone input and line input can be freely switched, and each input comes with a 48V phantom phase power supply selection. Built in DSP functions such as feedback suppression, automatic mixing, matrix mixing, equalizer, distributor, compressor, etc. Connected to computer software through a network for control, or connected to the central control via RS232 for remote control, suitable for use in various public address projects. Applicable occasions: conference rooms, multifunctional halls, auditoriums, courtrooms, professional performances

1.8 analog audio inputs and 8 analog audio outputs

2.4 Dante inputs and 4 Dante outputs; 4-way dante input can be switched with the first 4 analog inputs, and the 4-way dante output can be connected in parallel with the first 4 analog outputs

3. The microphone input and line input can be freely switched, and each input is equipped with a 48V phantom phase power switch

4. Each input is equipped with a feedback suppression function switch, with two levels of adjustment

5. Automatic mixing and matrix mixing functions, with 31 adjustable EQ inputs and 10 adjustable EQ outputs

6. USB driver free automatic connection software, RS232 central control


DSP chip

1. Signal processing: 32 bit Þ Xed/ β Loading point DSP 300MHz

2. Audio system delay:<1ms

3. Digital to analog conversion: 24 bit

4. Sampling rate: 48KHz

5. Input and output

6. Input channel: 8 balanced inputs Mic/line level

7. Audio interface: 3.81mm Phoenix plug, 12-pin

8. Input impedance: 11.5k Ω

9. Maximum input level: 12dBu/Line, -9dBu/Mic

10. Phantom power supply:+48VDC, 10mA, configured per channel

11. Output channel: 8 balanced outputs, line level

12. Output impedance: 150 Ω

Audio metrics

1. Frequency response curve: 20Hz-20kHz (+-0.5dB)/Line

20Hz-20kHz (+-1.5dB)/Mic

2. THD+N: -90dB (@ 12dBu, 1kHz, A-wt)/Line

-86dB (@ -7dBu, 1kHz, A-wt)/Mic

3. Signal to noise ratio: 105dB (@ 12dBu, 1kHz, A-wt)/Line

95dB (@ -7dBu, 1kHz, A-wt)/Mic

Connection and Display

1. USB: Micro-B type, drive free

RS232: Serial port communication

3. TCPIP network port: RJ-45, Optional

4. Indicator light: Power, Link,+48V, input/output audio signal

5. Electrical and physical parameters

6. Power supply range: AC100V --248V 50/60 Hz


Copyright LBT © 2022 www.lbtint.com All Rights Reserved. | 沪ICP备18014772号-2