1. It can convert 4-way Line or MIC signals (with phantom power supply) into dante signals for transmission

2. It can receive 4 Dante signals and convert them into balanced audio output. Featuring numerous high-quality features, without the need for design or learning at all

3. Can provide a complete audio processing solution for optimizing specific locations and systems

4. Automatically assign IP address through router DHCP, and carry out signal transmission with devices with dante function in the LAN, making the system more progressiveness and expandable

5. Connect directly to the network using Ethernet cables - no need to add or solder audio cables

6. Dante devices can be controlled in remote mode

7. It has an independent IP address that can be automatically obtained and set freely

8. The sampling rate can be set and the name can be freely set

9. Powered by network PoE

10. The audio transmission and control of the network use standard Category 5 Ethernet cables (CAT5)

11.4 microphone/line inputs with phantom power supply, adjustable gain for multiple inputs, and 4 balanced audio outputs

12. Frequency response: 20~20000 Hz

13. High pass filtering: 80 Hz, 18 dB/octave

14. Input impedance microphone: 2k ohms

15. Line: 68ohms

16. Output impedance microphone: 100 ohms

17. Line: 100 ohms

18. Signal to noise ratio: 68 dB, 1 kHz at 1Pa

19. Power supply: PoE IEEE802.3af standard

20. Phantom power supply: 48V DC

21. Input terminal: Quick connector

22. Output terminal: Quick connector

23. Output terminal: RJ45

24. Optional physical layer: Standard Ethernet

25. Interface: RJ45

26. Network cable quality: It is recommended to use shielded CAT5 or CAT6 network cables

27. Transmission speed: 100Mbps